How to Pressure Clean Exposed Aggregate Concrete Successfully
Exposed aggregate concrete is one of the most popular surfaces for driveways, patios, pool surrounds and pathways across the Sunshine Coast. Its mix of natural stones set in a cement base looks great and grips well underfoot. But it is also a surface that can be damaged by careless cleaning. Done correctly, pressure cleaning restores the colour and texture of your concrete. Done incorrectly, it can strip the cement paste, loosen stones and leave permanent marks. This guide explains how to get it right.
Why Exposed Aggregate Needs Special Care
Unlike a smooth broom-finish slab, exposed aggregate has a textured surface made up of small stones held in place by cement. The cement between the stones is the weak point. Too much pressure or the wrong technique can erode it, leaving stones loose and the surface rough or uneven.
The texture also traps dirt, algae, moss and mould in the tiny crevices between stones. This is why a quick pass with a garden hose rarely works, and why a careful, methodical approach is needed to reach the grime without harming the surface.
Why Sunshine Coast Conditions Make Cleaning Important
The Sunshine Coast climate is warm, humid and prone to heavy summer rain, which creates ideal conditions for biological growth on concrete. Shaded driveways, south-facing patios and areas under trees are especially prone to green algae, black mould and lichen. Coastal properties also deal with salt-laden air, which can leave a film on surfaces and contribute to staining over time.
Common problems on local exposed aggregate include:
- Green and black algae or mould on shaded and damp areas
- Tannin stains from leaves, palm fronds and fallen fruit
- Oil and grease marks on driveways and carports
- Rust stains from metal furniture, pot stands or irrigation water with high iron content
- Dirt and dust build-up that dulls the colour of the stones
- Efflorescence, the white powdery salt deposits that can appear on concrete
Slippery algae on pool surrounds, entry steps and sloping driveways is also a safety concern, which makes regular cleaning worthwhile beyond appearance alone.
Equipment You Will Need
Pressure Washer
A pressure washer in the range of 2,000 to 3,000 PSI (roughly 14 to 21 MPa) is generally suitable for exposed aggregate. Many domestic electric machines fall at the lower end of this range, which is often the safer choice for DIY work. Higher-powered petrol units can be used, but they demand more control and a greater working distance to avoid damaging the surface.

Nozzles
Nozzle choice matters more than most people realise. A 25 or 40 degree fan tip spreads the water over a wider area and reduces the risk of gouging. Avoid the 0 degree (red) pinpoint nozzle entirely, as it can cut into the cement and leave visible lines. A 15 degree tip may be used cautiously on tough stains, held at a greater distance.
Surface Cleaner Attachment
A rotating surface cleaner is one of the best investments for large areas such as driveways. It keeps the nozzle at a consistent height and delivers even coverage, which helps avoid the striped "zebra" marks that can appear when cleaning with a hand wand.
Cleaning Solutions and Safety Gear
Depending on the type of staining, you may need a concrete-safe detergent, a mould and algae treatment, or a degreaser. You should also wear safety glasses, closed-in non-slip footwear and long pants, as high-pressure water can throw stones and debris.
Step-by-Step Process
- Clear the area. Remove vehicles, furniture, pot plants, toys and loose debris. Sweep or blow away leaves and dirt so they are not driven into the surface.
- Protect surrounding areas. Cover or wet nearby garden beds and delicate plants, especially if you are using chemical treatments. Be mindful of doors, windows and weep holes where water could be forced in.
- Pre-treat stains. Apply a suitable degreaser to oil marks, a mould treatment to algae-affected areas, and allow the product to dwell according to the manufacturer's instructions. Do not let products dry on the surface.
- Test a small area. Start in an inconspicuous spot with a wide-angle nozzle held about 30 to 40 cm from the surface. Check that the stones stay firmly in place and no cement paste is washing out.
- Clean in even, overlapping passes. Work in consistent sweeping motions, keeping the nozzle at a steady distance and angle. Overlap each pass slightly to avoid streaks.
- Follow the slope. Work from the highest point down so dirty water drains away from the area you have already cleaned.
- Rinse thoroughly. Flush away all detergent and loosened grime with clean water, making sure nothing is left to dry on the surface.
- Allow to dry and inspect. Once dry, check for any missed spots, remaining stains or loose stones that may need attention.
Techniques to Protect the Surface
The key to successful pressure cleaning of exposed aggregate is control. Keep the nozzle moving and never hold it in one spot, as this can etch the cement. Maintain a consistent distance, generally starting further back and moving closer only if needed. Angle the spray slightly rather than pointing it straight down, which helps lift dirt out of the crevices without blasting directly into the cement between stones.
Pay extra attention to edges, joints and areas where the concrete has already weathered. Older slabs, or those that were not sealed, often have thinner https://andersongpeo658.capitaljays.com/posts/sunshine-coast-storm-cleanup-safe-outdoor-cleaning-steps surface paste and can be more vulnerable. If you notice stones loosening or sand-like material washing out, stop and reduce your pressure or increase your distance.
Dealing with Stubborn Stains
Oil and Grease
Fresh oil is easier to remove than old stains. Soak up excess with an absorbent material such as kitty litter, then apply a concrete degreaser and scrub with a stiff nylon brush before rinsing. Older marks may require repeated treatments or a poultice product.
Rust Stains
Rust marks respond to specialised rust removers designed for concrete. Always follow the label and test on a small area first, as some acids can dull or etch the stone and cement.
Algae, Mould and Lichen
Biological growth is best treated with a dedicated treatment that kills the organisms at the root rather than just blasting off the surface layer. This helps slow the return of growth, which can be quick in Sunshine Coast humidity.
Efflorescence
The white salt deposits can often be removed by dry brushing and light washing. If it keeps returning, there may be moisture moving through the slab, and the underlying cause should be investigated.
Common Mistakes to Avoid
- Using a pinpoint or very narrow nozzle that cuts into the cement
- Holding the wand too close to the surface
- Applying uneven passes that leave visible stripes
- Using strong acids without testing, which can etch and discolour the stones
- Letting chemicals dry on the surface or run into gardens and stormwater drains
- Ignoring loose stones or damaged areas before cleaning
Environmental and Regulatory Considerations
Wash water from pressure cleaning can carry detergents, oils, sediment and organic matter. On the Sunshine Coast, stormwater drains flow to local creeks, waterways and ultimately the ocean, so it is important not to let contaminated wash water enter them. Where possible, direct runoff onto grass or garden areas that can filter it, use biodegradable products, and collect and dispose of wastewater appropriately when cleaning oil-contaminated surfaces. Check current Sunshine Coast Council guidance and any applicable water restrictions before starting a large job.
Sealing After Cleaning
Once the concrete is completely clean and dry, applying a quality penetrating or film-forming sealer is one of the best ways to protect your investment. A sealer helps repel water, oils and stains, makes future cleaning easier, and can enhance the colour of the stones. Many sealers are available in matte, satin or wet-look finishes. Allow the surface to dry fully, often for 24 to 48 hours depending on weather, before applying a sealer, and choose a product suited to exposed aggregate and outdoor conditions. Resealing is typically needed every few years, depending on traffic and exposure.
How Often Should You Clean?
Most Sunshine Coast homes benefit from pressure cleaning exposed aggregate once or twice a year. Shaded, damp or high-traffic areas may need more frequent attention, while sunny, well-drained surfaces can often go longer. Regular sweeping and prompt removal of spills, leaves and fallen fruit will extend the time between full cleans and reduce the chance of lasting stains.
When to Call a Professional
DIY pressure cleaning can work well for small, lightly soiled areas, but a professional is worth considering when:
The area is large, steep or slippery, the concrete is old or already showing signs of wear, there are heavy oil, rust or tannin stains, or you want a consistent, streak-free result with sealing. Professionals have commercial-grade equipment, surface cleaners and the experience to adjust pressure and technique to suit the condition of your concrete. They can also safely handle wastewater and chemical treatments in line with local requirements.
Final Thoughts
Pressure cleaning exposed aggregate concrete is very achievable when you respect the surface. Use moderate pressure, a wide-angle nozzle, a consistent distance and the right treatment for each type of stain. Test first, work methodically, and consider sealing afterwards to keep the surface looking good for longer. With the humid Sunshine Coast climate encouraging algae and mould, a regular cleaning routine will keep your driveway, patio and pathways safe, attractive and long-lasting well into 2027 and beyond.


House Washing Sunshine Coast
(07) 5241 4915